Hello Valued Vaultek Customer!

To better assist you, we have included a video tutorial for replacing the wheels on your LifePod XRC case.

NOTE: Phillips head Screwdriver is required.

1. Unscrew the four(4) screws found in the wheel housing. 
2. Lift to remove the housing from the case.
3. Take the screwdriver and push the axle all the way through the housing.
4. Lift the wheel to remove it.
5. Slide the replacement wheel down into the 
wheel housing.
6. Guide the axle back through.
7. Slide the completed housing back down into the XRC. 
8. Tighten all four screws to successfully install the wheel.

If the above does not help to resolve the experienced issue, please let us know at your earliest convenience by creating a ticket with our support team ([email protected])

Kind regards!
The Vaultek Support Team