Hello Valued Vaultek Customer!

To better assist you, we have included a Barikade video tutorial for enrolling additional fingerprints.

Enroll Additional Fingerprints

1. Open the safe, remove battery cover and locate the program button.

2. When you are ready program wake the safe and quickly tap the program button.

3. You will notice the keypad flashing red and the LED ring is yellow, this is your prompt to scan one of your first admin prints.

4. When you see the 1 key blinking that means your admin print has been confirmed, now scan your new print 3 times at slightly different angles.

5.  To add additional prints repeat steps 2-4.

If the above does not help to resolve the experienced issue, please let us know at your earliest convenience by creating a ticket with our support team ([email protected])

Kind regards!
The Vaultek Support Team