Hello Valued Vaultek Customer!

NOTE: To pair the Nano Key with your SmartStation(DS2i), you must be within six(6) feet of the SmartStation(DS2i)

PAIRING INSTRUCTIONS FOR PUSH BUTTON NANO 2.0(VSK-N20)

1. With the safe open, press and hold the LEFT PROGRAM Button and the '2' key until all keys(1-4) begin blinking RED.

2. Release and immediately aim the Nano Key 2.0 at the SmartStation(DS2i)

3. Press and hold the Nano Key button until all keys(1-4) on the safe flash GREEN, indicating the Nano key has been successfully paired to the safe.

NOTE: If all Keys(1-4) flash RED, signaling the Nano Key did not pair to the safe, just start back over with STEP 1.

PAIRING INSTRUCTIONS FOR BIOMETRIC NANO 2.0(VSK-NT20)

1. With the safe open, press and hold the LEFT PROGRAM Button and the '2' key until all keys(1-4) begin blinking RED.

2. Release and immediately aim the Nano Key 2.0 at the SmartStation(DS2i).

3. Place an authorized print(previously enrolled on the Nano Key) on the Biometric Nano Key Scanner until all keys(1-4) on the safe flash GREEN, indicating the Nano key has been successfully paired to the safe.

NOTE: If all Keys(1-4) flash RED, signaling the Nano Key did not pair to the safe, just start back over with STEP 1.

The area highlighted(below), in red, contains the most detailed minutiae for the scanner to recognize.

To better assist you, we have included a SmartStation(DS2i) video tutorial for Nano key pairing.

If the above does not help to resolve the experienced issue, please let us know at your earliest convenience by creating a ticket with our support team ([email protected])

Kind regards!
The Vaultek Support Team