Hello Valued Vaultek Customer!

Biometric Programming Instructions

NOTE: The following instructions are for programming the administrative prints(Storage Slots 1&2).

1. Open the safe.

2. Tap the RIGHT PROGRAM button and the '1' key will begin to flash. This is your visual indicator to begin the enrollment process.

3. Place the finger that you wish to enroll, flat on the scanner, until the safe chimes and the '1' key turns GREEN.

4. Once the next key begins to flash, lift and reposition the same finger for a total of three(3) scans.

5. Continue in this manner until keys1-3 are glowing GREEN.

6. The keypad will flash GREEN to signal a successful enrollment.

Repeat the above steps to create the second administrative print.

Biometric Programming Instructions 

NOTE: The following instructions are for programming the biometric storage slots 3-20.

1. Open the safe.

2. Tap the RIGHT PROGRAM button.  The biometric scanner LED ring will turn YELLOW. This is your visual indicator that the safe requires authorization of an administrative print in order to continue.

3. Place an Administrative print on the scanner to authorize additional prints.  Once authorized, the '1' key will flash RED.

4. Place the finger that you wish to enroll, flat on the scanner, until the safe chimes and the '1' key turns GREEN.

5. Once the next key begins to flash, lift and reposition the same finger for a total of three(3) scans.

6. Continue in this manner until all keys 1-3 are glowing GREEN.

7. The keypad will flash GREEN to signal a successful enrollment.

The area highlighted(below), in red, contains the most detailed minutiae for the scanner to recognize.

To better assist you, we have included a DS2i SmartStation(Bluetooth) video tutorial for programming the biometric scanner.

If the above does not help to resolve the experienced issue, please let us know at your earliest convenience by creating a ticket with our support team ([email protected])

Kind regards!
The Vaultek Support Team