Vaultek NSL2i & NV Series (ViSN) Hotkeys & Programming
Aug 14, 2026
307
NSL2i / NV10i / NV20i / NV30i (ViSN) Series
Model Introduction & Overview
Welcome to the NSL2i, NV10i, NV20i, and NV30i (ViSN) Series. This reference guide provides the step-by-step hotkeys necessary to operate, program, and manage your safe. Because this series supports dual functionality, the hotkeys are separated into ViSN Mode and Essential Mode.
Step-by-Step Hotkey Tables
ViSN Mode Hotkeys
| No. | HotKeys | Function |
|---|---|---|
| 1 | 1+P | App Pairing setup |
| 2 | 5+P | Toggle Mode: ViSN mode or Essential mode |
| 3 | 1+3 | Setup sound |
| 4 | 2+4 | Tamper detection |
| 5 | Press and hold "5" | View battery status |
| 6 | Press and hold "P" | Remote operation authorization (e.g., programming fingerprints, master code, smart key pairing, etc.) |
Essential Mode Hotkeys
| No. | HotKeys | Function |
|---|---|---|
| 1 | 1+P | Master code programming |
| 2 | 2+P | Fingerprint programming |
| 3 | 3+P | Delete all fingerprints (followed immediately by the mastercode) |
| 4 | 4+P | Toggle dual entry mode |
| 5 | 5+P | Toggle Mode: ViSN mode or Essential mode |
| 6 | 1+3 | Setup sound |
| 7 | 2+3+P | Toggle anti-pry alarm |
| 8 | 2+4 | Tamper detection |
| 9 | 3+4+P | Toggle open door over-time alarm |
| 10 | 3+5+P | Interior Light ON/OFF and Set light up Duration (10 Seconds by Default). Options: 10s, 30s, 60s, or always stay ON under AC power supply. |
| 11 | Press and hold "5" | View battery status |
Troubleshooting & Notes
- Mode Toggling: You can switch between ViSN Mode and Essential Mode at any time by pressing 5+P.
- Interior Light (Essential Mode): If you want the interior light to remain constantly ON, you must ensure the safe is connected to an AC power supply.
- Remote Authorization (ViSN Mode): When in ViSN mode, pressing and holding "P" authorizes remote operations via the app, which is required for programming fingerprints, master codes, and smart keys remotely.
