Vaultek V10i & V20i (Essential+Bio) Hotkeys & Programming
Aug 14, 2026
276
V10i / V20i Essential Series
Model Introduction & Overview
Welcome to the V10i / V20i (Essential+Bio) Series. This guide provides the step-by-step hotkeys and functions necessary to operate, program, and manage your device efficiently.
Step-by-Step Hotkey Table
| No. | HotKeys | Function |
|---|---|---|
| 1 | 1+P | Master code programming |
| 2 | 2+P | Fingerprint programming |
| 3 | 3+P | Delete all fingerprints(followed immediately by the mastercode) |
| 4 | 4+P | Toggle dual entry mode |
| 5 | 1+3 | Setup sound |
| 6 | 2+3+P | Unauthorized Access Alarm (On by default) |
| 7 | 2+4 | Tamper detection (tamper: #3 key turns red, no tamper, #3 key turns green) |
| 8 | 3+4+P | Toggle open door over-time alarm |
| 9 | 3+5+P | Interior Light ON/OFF and Set light up Duration (10 Seconds by Default) (10s, 30s, 60s, always stay ON under AC power supply) |
| 10 | Press and hold "5" | View battery status |
Troubleshooting & Notes
- Interior Light Duration: For hotkey 3+5+P, the light duration indicators are as follows:
- "1" key Green: 10 seconds
- "1+2" keys Green: 30 seconds
- "1+2+4" keys Green: 60 seconds
- "1+2+4" keys Red: Light OFF
