Vaultek VE10 & VE20 Essential Safes: Hotkey Reference Guide
Aug 20, 2026
41
Vaultek VE10 & VE20 Essential Safes: Hotkey Reference Guide
This guide outlines the supported hotkey functions for the Vaultek VE10 and VE20 models.
Note: Unless a 'tap' is specified, all hotkeys default to 'Press and Hold'.
| Function | Hotkey |
|---|---|
| Master Code Programming | P |
| Toggle Interior LED Light | 1 |
| Toggle Sound | 1+3 |
| Battery Status Query | 5 |
| Tamper Detection | 2+4 |
| Travel Mode | 1+3+5 |
| Toggle Alert of Manual Unlock | 3+P |
Unsupported Functions
The following functions and parameters are not supported on the VE10 and VE20 models:
- System & Access: Factory Reset, Biometric Scanner Programming, Delete Fingerprints, Toggle Dual Entry Mode, Toggle Unauthorized Access Alert, Toggle Open Door Alarm.
- NanoKey
- Environment & Sensors: View Temperature and Humidity, Toggle Temperature Unit (℃ or ℉), Toggle Impact Alarm Sensitivity..
