VR10 / VT10 / VT10i Safes: Hotkey Reference Guide
Aug 20, 2026
43
Vaultek VR10 / VT10 / VT10i Safes: Hotkey Reference Guide
This guide outlines the supported hotkey functions for the Vaultek VR10, VT10, and VT10i models.
Note: Unless a 'tap' is specified, all hotkeys default to 'Press and Hold'.
P= PROGRAM
| Function | Hotkey |
|---|---|
| Factory Reset | 1+5+P |
| Master Code Programming | P |
| Biometric Scanner Programming | Tap 'P' |
| Delete Fingerprints | 3+5, followed by the mastercode |
| Toggle LED Light | 1 |
| Toggle Sound | 1+3 |
| Battery Status Query | 5 |
| Tamper Detection | 2+4 |
| Travel Mode | 1+3+5 |
| Toggle Alert of Manual Unlock | 3+P |
| Disable/Enable Bluetooth | 2+5 |
| Unlock by APP | 1+4+P |
| APP Pairing | 4+5+P |
Unsupported Functions
The following functions are not supported on the VR10, VT10, and VT10i models:
- Screen & Lighting: Interior light time Extension
- System & Access: Toggle Unauthorized Access Alert, Toggle Open Door Alarm.
- NanoKey
- Environment & Sensors
- Misc. Settings: Motor Reset, Active low-voltage alarm, Low Power Mode Set.
