Skip to content
You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
You are viewing the article in preview mode. It is not live at the moment.

SLV200i Programming a Mastercode

SLV200i Programming a Mastercode 

Hello Valued Vaultek Customer!

 

Mastercode Programming Instructions

 

1. Open the safe.

2. Press and hold the '1' and PROGRAM buttons together for three(3) seconds until all keys(1-5) light up RED.

3. Release and immediately enter your new mastercode.

4. Press and hold the '1' and PROGRAM buttons together(for the 2nd time) for three(3) seconds until all keys(1-5) light up RED.

5. Release and immediately enter your new mastercode.

6. Press and hold the '1' and PROGRAM buttons together(for the 3rd and final time) for three(3) seconds until all keys(1-5) flash GREEN.

 

To better assist you, we have included a video tutorial for Mastercode programming

 

 

 

If the above does not help to resolve the experienced issue, please let us know at your earliest convenience by creating a ticket with our support team ([email protected])

 

Kind regards!
The Vaultek Support Team

Feedback

0 out of 0 found this helpful