Hello Valued Vaultek Customer!

To better assist you, we have included a video tutorial for enrolling your fingerprints in Essential Mode.

Your safe in Essential Mode has twenty(20) storage slots.  The first two(2) storage slots are considered the Administrative Prints.

Biometric Programming Instructions

NOTE: The following instructions are for programming the administrative prints(Storage Slots 1&2) in ESSENTIAL MODE only.

1. Open the safe.

2. Press and hold the '2' and the RIGHT PROGRAM buttons together for three(3) seconds until the '1' key begins to flash. This is your visual indicator to begin the enrollment process.

3. Place the finger that you wish to enroll, flat on the scanner, until the safe chimes and the '1' key turns GREEN.

4. Once the next key begins to flash, lift and reposition the same finger for a total of three(3) scans.

5. Continue in this manner until keys1-3 are glowing GREEN.

6. The keypad will flash GREEN to signal a successful enrollment.

Biometric Programming Instructions 

NOTE: The following instructions are for programming the biometric storage slots 3-20 in ESSENTIAL MODE only.

1. Open the safe.

2. Press and hold the '2' and the RIGHT PROGRAM buttons together for three(3) seconds until all keys flash RED and the biometric scanner ring is YELLOW.

3. Place an Administrative print on the scanner to authorize additional prints.  Once authorized, the '1' key will flash RED.

4. Place the finger that you wish to enroll, flat on the scanner, until the safe chimes and the '1' key turns GREEN.

5. Once the next key begins to flash, lift and reposition the same finger for a total of three(3) scans.

6. Continue in this manner until all keys 1-3 are glowing GREEN.

7. The keypad will flash GREEN to signal a successful enrollment.

The area highlighted(below), in red, contains the most detailed minutiae for the scanner to recognize.

If the above does not help to resolve the experienced issue, please let us know at your earliest convenience by creating a ticket with our support team ([email protected])

Kind regards!
The Vaultek Support Team