Hello Valued Vaultek Customer!

When your SmartStation is operating in ViSN Mode, all display screen customization occurs directly in the Vaultek ViSN smartphone app.

When your SmartStation is operating in Essential Mode, all customization is performed locally on the safe.

Setting the Time in Essential Mode

1. Press and hold the LEFT PROGRAM buttons until the keypad flashes RED.

2. With the HOUR section of the clock flashing, use the RIGHT PROGRAM button to toggle through to the desired hour.

3. Then tap the time on the display clock to get the minute section flashing.

4.  Use the RIGHT PROGRAM button to toggle through to the desired minute selection.

5.  Once the desired time is set, press the LEFT PROGRAM button to exit EDIT Mode.

Please watch the tutorial below for additional customization features available.

If the above does not help to resolve the experienced issue, please let us know at your earliest convenience by creating a ticket with our support team ([email protected])

Kind regards!
The Vaultek Support Team