LifePod XR/XT Deleting All Fingerprints
Hello Valued Vaultek Customer! Deleting Enrolled Fingerprints 1. Tap the 'LOCK' icon to wake the unit up. 2. Press and hold the '1' & '3' keys for three(3) seconds until all keys(1-4) illuminate. 3. Release and immediately enter the mastercode. 4. If successful, the LED indicator on the LEFT side of the keypad…
LifePod XRC Mastercode Programming
Hello Valued Vaultek Customer! * To get started, undo the four-point compression latches. If the lid is having issues opening it is likely internally pressurized. Open the front key cover to release the pressure. * Locate and remove the battery cover. Pull out the battery snap and connect a 9V alkaline batte…
NDS2i/NDS5i SmartStation Customizing Your LED Display
Hello Valued Vaultek Customer! When your SmartStation is operating in ViSN Mode, all display screen customization occurs directly in the Vaultek ViSN smartphone app. When your SmartStation is operating in Essential Mode, all customization is performed locally on the safe. Setting the Time in Essential Mode…
LifePod 10&20 Understanding the LED indicators
Hello Valued Vaultek Customer! To better assist you, we have included an informational Lifepod video to help with understanding the LED indicators. Status LED The status LED will provide feedback on various commands. It will light GREEN when the correct codes are entered and RED when an incorrect code is…
DS2i SmartStation (Bluetooth) Customizing Your LED Display
Hello Valued Vaultek Customer! ACCESSING THE DISPLAY SCREEN SETTINGS MODE 1. Open the DS2i SmartStation. 2. Tap the LEFT PROGRAM button to enter the display screen settings mode. 3. Then tap on different screen locations to affect the display screen settings. Please watch the tutorial below for specific cust…
NV10i/NV20i/NV30i Factory Reset
Hello Valued Vaultek Customer! Factory Reset NOTE: A Factory Reset will restore the safe to its default mastercode. All safe programming will be erased and will need to be reprogrammed. The Factory Reset will only apply to whichever operating mode(ViSN or Essential) the safe is in. The operating modes operate…
LifePod 10&20 How To Lock Your Lifepod
Hello Valued Vaultek Customer! To better assist you, we have included a Lifepod video tutorial for locking operations. * To get started, first engage the side compression latches. This will ensure that the locking mechanisms are properly aligned. * On the control panel, press and hold the 'LOCK' icon fo…
LifePod 20 Interior Light Settings
Hello Valued Vaultek Customer! Below are the three(3) settings for the interior light on your LifePod 20. The interior LED light will come on when the lid is open and stays on for about 20 seconds by default. You have the option to disable the light or extend the light to stay on longer. To toggle the inter…
LifePod 10&20 How To Insert the 9V Battery
Hello Valued Vaultek Customer! To better assist you, we have included a Lifepod video tutorial for battery installation. * To get started, undo the side compression latches. If the lid is having issues opening it is likely internally pressurized. Open the front key cover to release the pressure. * Locat…
