Hello Valued Vaultek Customer!

To better assist you, we have included a video tutorial for enrolling your fingerprints in Essential Mode.

Your safe in Essential Mode has twenty(20) storage slots.  The first two(2) storage slots are considered the Administrative Prints.

Biometric Programming Instructions

NOTE: The following instructions are for programming the administrative prints(Storage Slots 1&2) in ESSENTIAL MODE only.

1. Open the safe.

2. Press and hold the '2' and PROGRAM buttons together for three(3) seconds until the LCD Screen indicates that the scanner is ready. This is your visual indicator to begin the enrollment process.

3. Place the finger that you wish to enroll, flat on the scanner, until the safe beeps.

4. Lift and reposition the same finger, for a total of five(5) scans.

5. Continue in this manner until the LCD screen indicates 'PROGRAM COMPLETE'.

Biometric Programming Instructions 

NOTE: The following instructions are for programming the biometric storage slots 3-20 in ESSENTIAL MODE only.

1. Open the safe.

2. Press and hold the '2' and PROGRAM buttons together for three(3) seconds until the biometric scanner ring is YELLOW.

3. Place an Administrative print on the scanner to authorize additional prints.  Once authorized the LCD screen will indicate that the scanner is ready to enroll.

4. Place the finger that you wish to enroll, flat on the scanner, until the safe beeps.

5. Lift and reposition the same finger, for a total of five(5) scans.

6. Continue in this manner until the LCD screen indicates 'PROGRAM COMPLETE'.

The area highlighted(below), in red, contains the most detailed minutiae for the scanner to recognize.

If the above does not help to resolve the experienced issue, please let us know at your earliest convenience by creating a ticket with our support team ([email protected])

Kind regards!
The Vaultek Support Team