Hello Valued Vaultek Customer!

To better assist you, we have included a video tutorial for NRS Rifle Safe Mastercode programming in Essential Mode.

Mastercode Programming Instructions

NOTE: The following instructions are for ESSENTIAL MODE only.

1. Open the safe.     

2. Press and hold the '1' and the PROGRAM buttons together for three(3) seconds until the safe beeps, and the LED Status Bar flashes GREEN.

3. Release and immediately enter your new mastercode.

4. Press and hold the '1' and the PROGRAM buttons together(for the 2nd time) for three(3) seconds until the safe beeps, and the LED Status Bar flashes GREEN.

5. Release and immediately enter your new mastercode(for the 2nd time).

6. Press and hold the '1' and the PROGRAM buttons together(for the 3rd and final time) for three(3) seconds until the safe beeps, and the LED Status Bar flashes GREEN.  The LCD screen will confirm 'CODE RESET COMPLETE'.

If the above does not help to resolve the experienced issue, please let us know at your earliest convenience by creating a ticket with our support team ([email protected])

Kind regards!
The Vaultek Support Team