Hello Valued Vaultek Customer!

NOTE: To pair the Nano Key 2.0 with your VS10i & VS20/VS20i, you must be within six(6) feet of the safe.

PAIRING INSTRUCTIONS FOR PUSH BUTTON NANO 2.0(VSK-N20)

1. With the safe open, press and hold the '5' key followed by the PROGRAM BUTTON, holding both buttons together for three(3) seconds until all keys(1-5) begin blinking RED.

2. Release and immediately aim the Nano Key 2.0 at the safe.

3. Press and hold the Nano Key button until all keys(1-5) on the safe flash GREEN, indicating the Nano key has been successfully paired to the safe.

NOTE: If all Keys(1-5) flash RED, signaling the Nano Key did not pair to the safe, just start back over with STEP 1.

PAIRING INSTRUCTIONS FOR BIOMETRIC NANO 2.0(VSK-NT20)

1. With the safe open, press and hold the '5' key followed by the PROGRAM BUTTON, holding both buttons together for three(3) seconds until all keys(1-5) begin blinking RED.

2. Release and immediately aim the Nano Key 2.0 at the safe.

3. Place an authorized print(previously enrolled on the Nano Key) on the Biometric Nano Key Scanner until all keys(1-5) on the safe flash GREEN, indicating the Nano key has been successfully paired to the safe.

NOTE: If all Keys(1-5) flash RED, signaling the Nano Key did not pair to the safe, just start back over with STEP 1.

The area highlighted(below), in red, contains the most detailed minutiae for the scanner to recognize.

To better assist you, we have included a VS10i & VS20/VS20i video tutorial for Nano key pairing.

If the above does not help to resolve the experienced issue, please let us know at your earliest convenience by creating a ticket with our support team ([email protected])

Kind regards!
The Vaultek Support Team