Vaultek NSL200i (ViSN) Series Hotkeys & Programming
Aug 14, 2026
275
NSL200i (ViSN) Series Hotkey Guide
Overview
The NSL200i (ViSN) series supports dual-mode operations: ViSN(WIFI) Mode and Essential Mode. Use the hotkeys below depending on the active operational mode of your safe.
1. ViSN Mode Hotkeys
| Hotkey Combination | Function | Notes |
|---|---|---|
| 1 + P | WiFi setup | |
| 5 + P | Toggle Operational Mode | Switches between ViSN(WiFi) mode and Essential mode. |
| 1 + 3 | Setup sound | |
| 2 + 4 | Tamper detection | |
| Press and hold "5" | View battery status | |
| Press and hold "P" | Remote operation authorization | Required before programming fingerprints, master codes, or smart key pairing remotely. |
2. Essential Mode Hotkeys
| Hotkey Combination | Function | Notes |
|---|---|---|
| 1 + P | Master code programming | |
| 2 + P | Fingerprint programming | |
| 3 + P | Delete all fingerprints | Followed immediately by entering the mastercode |
| 4 + P | Toggle dual entry mode | |
| 5 + P | Toggle Operational Mode | Switches between ViSN(WiFi) mode and Essential mode. |
| 1 + 3 | Setup sound | |
| 2 + 3 + P | Toggle anti-pry alarm | |
| 2 + 4 | Tamper detection | |
| 3 + 4 + P | Toggle open door over-time alarm | |
| 3 + 5 + P | Interior Light Configuration | Configures ON/OFF and duration (10s default, 30s, 60s, or always ON under AC power). |
| 4 + 5 + P | Toggle impact alarm sensitivity | Options: OFF, LOW, MID, HIGH. |
| Press and hold "5" | View battery status |
