Hello Valued Vaultek Customer!

1. To get started, undo the four-point compression latches. If the lid is having issues opening it is likely internally pressurized. Open the front key cover to release the pressure.
2. Locate and remove the battery cover. Pull out the battery snap and connect a 9V alkaline battery.  Be sure to place a ribbon underneath the battery. This will make it easier to remove the battery in the future.
3. When the battery snaps into place, you will hear a welcome tone, and the keypad will light up. If the keypad is flashing, then your battery is likely low. Replace the battery with a brand new one.

To better assist you, we have included a Lifepod XRC video tutorial for Mastercode programming.

TIP: Your code can be a minimum of 4 digits or as long as 8 digits. Two keys can not be pressed simultaneously. Programming a new code will overwrite your previous code.

1. First, open the unit and tap the lock pad to wake the unit up. When the keypad lights up, your LifePod is awake and ready for programming.

2. Press and hold the PROGRAM button for 3 seconds until ALL keys (1-4) turn solid RED.

3. Enter your new code.

4. Press and hold the PROGRAM button a second time for 3 seconds until ALL keys (1-4) turn solid RED.

5. Enter your new code a second time.

6. Press and hold the PROGRAM button a third time for 3 seconds. The status LED will flash GREEN, and LifePod will beep to confirm the code change is successful.

If the above does not help to resolve the experienced issue, please let us know at your earliest convenience by creating a ticket with our support team ([email protected])

Kind regards!
The Vaultek Support Team