Hello, valued Vaultek Customer!

NOTE: This is only for the first generation WIFI safe and not the ViSN-compatible safes.

TIP: Your code can be a minimum of 4 digits or as long as 8 digits. Two keys can not be pressed simultaneously. Programming a new code will overwrite your previous code.

Mastercode Programming Instructions

1. Open the safe.

2. Press and hold the '1' and PROGRAM buttons together for three(3) seconds until the LCD screen prompts you to enter your new Mastercode.

3. Release and immediately enter your new mastercode on the keypad.

4. Press and hold the '1' and PROGRAM buttons together(for the 2nd time) for three(3) seconds until the LCD screen prompts you to enter your new Mastercode.

5. Release and immediately enter your new mastercode(for the 2nd time).

6. Press and hold the '1' and PROGRAM buttons together(for the 3rd and final time) for three(3) seconds until the LCD screen confirms a mastercode reset is COMPLETE.

To better assist you, we have included a video tutorial for Mastercode programming for the RS Series.

If the above does not help to resolve the experienced issue, please let us know at your earliest convenience by creating a ticket with our support team ([email protected])

Kind regards!
The Vaultek Support Team